| |
The
N7337 is a high performance multi-port print server designed
for medium and large sized Novell NetWare,
Windows NT, Windows 95/98/ME/2k/XP Peer-to-Peer, and UNIX
networks. Quickly
and easily set up, configure and manage N7337 print servers
from your Windows workstation. That's the power N7337 bring
to network printing.
- 1. Easy
Installation can be completed in minutes by using a Windows-based
installation program.
- 2. Fast
Fast DMA parallel ports and an embedded intelligent microprocessor
provide the highest throughput.
- 3. Flexible
The compact N7337 can be installed anywhere on the network
by using 10/100Mbps Ethernet cabling.
- 4. Cost-Effective
The N7337 incorporates three ports, allowing you to connect
up to three printers to enhance your productivity.
- 5. For Mixed Environments
Multi-protocol support enables simultaneous printing from
NetWare, Windows NT, Windows 95/98, and UNIX systems.
- 6. Upgradable
With embedded Flash memory, the N7337 is built for the
future.
Software
NetWare
1. Fully compatiable with NetWare 3.x, 4.x, 5.x
2. Fully supports NetWare "Print Server" mode
3. Software upgradable
4. Supports frame type suto-detection function
5. East-to-use Windows-based installation program
6. Provides POST(Power On Self Test)
7. Automatically attach to NetWare file server after recovery
from network failure
8. Supports NetWare's DHCP server
Windows NT
1. Supports Windows NT's TCP/IP LPR Port printing
2. Implemented as a Windows Print Monitor
3. Configured as a network printer on Windows NT
4. Supports multiple servers, printing on demand
5. Supports IPX, NetBEUI, and TCP/IP protocols
6. Supports Windows NT Printer Pool feature
7. Windows based TCP/IP configuration program
8. Supports DHCP
9. Supports Web Management via browser
10. Provides POST for self-diagnostics
Windows 95/98/ME/2k/XP
1. Implemented as a Windows Print Monitor
2. Supports Windows 95/98 Peer-to-Peer networks
3. Supports IPX, NetBEUI, and TCP/IP protocols
4. Windows based TCP/IP configuration program
5. Supports Web Management via browser
UNIX
1. Supports RFC 1179 peer-to-peer printing
2. Supports tftp for Windows NT and UNIX setup
3. Supports BSD UNIX:BSD 4.2, 4.3, 4.4, Sun OS, DEC Ultrix,
IBM AIX, HP-UX, etc.
4. Supports System V UNIX:AT&T, SCO, Sun Solaris,
Unixware, Linux, etc.
5. Supports RARP, BOOTP, and DHCP protocols
6. Supports UNIX's LP Daemon (LPD/LPR) printing
Hardware
1. Embedded high-speed microprocessor
2. Complies with ANSI/IEEE 802.3 and 802.3u Ethernet standards
3. Embedded Flash ROM
4. Embedded SRAM
5. Built-in EEPROM
6. Embedded 10/100Mbps Ethernet UTP connector
7. 10/100Mbps Ethernet network speed auto negotiation(N-Way)
8. Embedded DMA fast printing ports
9. 3 standard 25-pin D-type female CENTRONICS printer ports
10. 3 LED lights for status and error indications
11. Dimentions : 228(L) x 137(W) x 36(H) mm
12. Approval : CE, FCC Class A
* Specifications are subject to change without prior notice
|
|